initLab - User contributions [en]

InitLabv4/Printers/Konica Minolta C3110

2024-03-15T17:16:12Z

Rattus:

= TL;DR =

'''Model:''' Konica Minolta C3110

'''URI:''' ''socket://172.31.190.43:9100'' (for printing) & ''http://172.31.190.43'' (UI)

'''Location:''' main room

'''Type:''' color laser MFP with ADF

= Overview =

It can be accessed for printing on URI: '''socket://172.31.190.43:9100''' .

UI can be accessed on '''http://172.31.190.43'''

=== Network Printing Instructions ===

[https://openwrt.org/docs/guide-user/services/print_server/p910ndprinterserver#configure_clients See how to connect over the network]

On windows ''TODO'' .

=== Scanning to the Internal Storage ===

[[Image:Scan.jpg|600px]]

Put what you want to scan on the flatbed or the ADF.

# Click on the <code>scan</code> button
# Select resolution/scanning mode using the display and the keypad
## Select destination to the HDD (note that if you select to HDD other people might download the file before you delete it)
# Select <code>start</code> (black-and-white or color)
# Go to http://172.31.190.43/
# Click on <code>Public User</code> and <code>Log in</code>
# Click on <code>Storage</code>
# Click on <code>Public -> View</code>
# Select you document and click <code>copy</code> saving your file
# Don't forget to delete you document

=== Copying ===

[[Image:copy.jpg|600px]]

# Click on the <code>kopier</code> button
# Select resolution/scanning mode using the display and the keypad
## Select destination to the HDD (note that if you select to HDD other people might download the file before you delete it)
# Select start (black-and-white or color)

InitLabv4/Printers/Konica Minolta C3110

2024-03-15T17:15:54Z

Rattus:

= TL;DR =

'''Model:''' Konica Minolta C3110

'''URI:''' ''socket://172.31.190.43:9100'' (for printing) & ''http://172.31.190.43'' (UI)

'''Location:''' main room

'''Type:''' color laser MFP with ADF

= Overview =

It can be accessed for printing on URI: '''socket://172.31.190.43:9100''' .

UI can be accessed on '''http://172.31.190.43'''

=== Network Printing Instructions ===

[https://openwrt.org/docs/guide-user/services/print_server/p910ndprinterserver#configure_clients See how to connect over the network]

On windows ''TODO'' .

=== Scanning to the Internal Storage ===

[[Image:Scan.jpg|500px]]

Put what you want to scan on the flatbed or the ADF.

# Click on the <code>scan</code> button
# Select resolution/scanning mode using the display and the keypad
## Select destination to the HDD (note that if you select to HDD other people might download the file before you delete it)
# Select <code>start</code> (black-and-white or color)
# Go to http://172.31.190.43/
# Click on <code>Public User</code> and <code>Log in</code>
# Click on <code>Storage</code>
# Click on <code>Public -> View</code>
# Select you document and click <code>copy</code> saving your file
# Don't forget to delete you document

=== Copying ===

[[Image:copy.jpg|500px]]

# Click on the <code>kopier</code> button
# Select resolution/scanning mode using the display and the keypad
## Select destination to the HDD (note that if you select to HDD other people might download the file before you delete it)
# Select start (black-and-white or color)

InitLabv4/Printers/Konica Minolta C3110

2024-03-15T17:15:39Z

Rattus:

= TL;DR =

'''Model:''' Konica Minolta C3110

'''URI:''' ''socket://172.31.190.43:9100'' (for printing) & ''http://172.31.190.43'' (UI)

'''Location:''' main room

'''Type:''' color laser MFP with ADF

= Overview =

It can be accessed for printing on URI: '''socket://172.31.190.43:9100''' .

UI can be accessed on '''http://172.31.190.43'''

=== Network Printing Instructions ===

[https://openwrt.org/docs/guide-user/services/print_server/p910ndprinterserver#configure_clients See how to connect over the network]

On windows ''TODO'' .

=== Scanning to the Internal Storage ===

[[Image:Scan.jpg|200px]]

Put what you want to scan on the flatbed or the ADF.

# Click on the <code>scan</code> button
# Select resolution/scanning mode using the display and the keypad
## Select destination to the HDD (note that if you select to HDD other people might download the file before you delete it)
# Select <code>start</code> (black-and-white or color)
# Go to http://172.31.190.43/
# Click on <code>Public User</code> and <code>Log in</code>
# Click on <code>Storage</code>
# Click on <code>Public -> View</code>
# Select you document and click <code>copy</code> saving your file
# Don't forget to delete you document

=== Copying ===

[[Image:copy.jpg|200px]]

# Click on the <code>kopier</code> button
# Select resolution/scanning mode using the display and the keypad
## Select destination to the HDD (note that if you select to HDD other people might download the file before you delete it)
# Select start (black-and-white or color)

InitLabv4/Printers/Konica Minolta C3110

2024-03-15T17:14:05Z

Rattus: /* Scanning to the Internal Storage */

= TL;DR =

'''Model:''' Konica Minolta C3110

'''URI:''' ''socket://172.31.190.43:9100'' (for printing) & ''http://172.31.190.43'' (UI)

'''Location:''' main room

'''Type:''' color laser MFP with ADF

= Overview =

It can be accessed for printing on URI: '''socket://172.31.190.43:9100''' .

UI can be accessed on '''http://172.31.190.43'''

=== Network Printing Instructions ===

[https://openwrt.org/docs/guide-user/services/print_server/p910ndprinterserver#configure_clients See how to connect over the network]

On windows ''TODO'' .

=== Scanning to the Internal Storage ===

[[Image:Scan.jpg]]

Put what you want to scan on the flatbed or the ADF.

# Click on the <code>scan</code> button
# Select resolution/scanning mode using the display and the keypad
## Select destination to the HDD (note that if you select to HDD other people might download the file before you delete it)
# Select <code>start</code> (black-and-white or color)
# Go to http://172.31.190.43/
# Click on <code>Public User</code> and <code>Log in</code>
# Click on <code>Storage</code>
# Click on <code>Public -> View</code>
# Select you document and click <code>copy</code> saving your file
# Don't forget to delete you document

=== Copying ===

[[Image:copy.jpg]]

# Click on the <code>kopier</code> button
# Select resolution/scanning mode using the display and the keypad
## Select destination to the HDD (note that if you select to HDD other people might download the file before you delete it)
# Select start (black-and-white or color)

File:Scan.jpg

2024-03-15T17:13:35Z

Rattus:

InitLabv4/Printers/Konica Minolta C3110

2024-03-15T17:13:22Z

Rattus: /* Scanning to the Internal Storage */

= TL;DR =

'''Model:''' Konica Minolta C3110

'''URI:''' ''socket://172.31.190.43:9100'' (for printing) & ''http://172.31.190.43'' (UI)

'''Location:''' main room

'''Type:''' color laser MFP with ADF

= Overview =

It can be accessed for printing on URI: '''socket://172.31.190.43:9100''' .

UI can be accessed on '''http://172.31.190.43'''

=== Network Printing Instructions ===

[https://openwrt.org/docs/guide-user/services/print_server/p910ndprinterserver#configure_clients See how to connect over the network]

On windows ''TODO'' .

=== Scanning to the Internal Storage ===

[[Image:scan.jpg]]

Put what you want to scan on the flatbed or the ADF.

# Click on the <code>scan</code> button
# Select resolution/scanning mode using the display and the keypad
## Select destination to the HDD (note that if you select to HDD other people might download the file before you delete it)
# Select <code>start</code> (black-and-white or color)
# Go to http://172.31.190.43/
# Click on <code>Public User</code> and <code>Log in</code>
# Click on <code>Storage</code>
# Click on <code>Public -> View</code>
# Select you document and click <code>copy</code> saving your file
# Don't forget to delete you document

=== Copying ===

[[Image:copy.jpg]]

# Click on the <code>kopier</code> button
# Select resolution/scanning mode using the display and the keypad
## Select destination to the HDD (note that if you select to HDD other people might download the file before you delete it)
# Select start (black-and-white or color)

File:Copy.jpg

2024-03-15T17:13:06Z

Rattus:

InitLabv4/Printers/Konica Minolta C3110

2024-03-15T17:12:43Z

Rattus:

= TL;DR =

'''Model:''' Konica Minolta C3110

'''URI:''' ''socket://172.31.190.43:9100'' (for printing) & ''http://172.31.190.43'' (UI)

'''Location:''' main room

'''Type:''' color laser MFP with ADF

= Overview =

It can be accessed for printing on URI: '''socket://172.31.190.43:9100''' .

UI can be accessed on '''http://172.31.190.43'''

=== Network Printing Instructions ===

[https://openwrt.org/docs/guide-user/services/print_server/p910ndprinterserver#configure_clients See how to connect over the network]

On windows ''TODO'' .

=== Scanning to the Internal Storage ===

[[Image:copy.jpg]]

Put what you want to scan on the flatbed or the ADF.

# Click on the <code>scan</code> button
# Select resolution/scanning mode using the display and the keypad
## Select destination to the HDD (note that if you select to HDD other people might download the file before you delete it)
# Select <code>start</code> (black-and-white or color)
# Go to http://172.31.190.43/
# Click on <code>Public User</code> and <code>Log in</code>
# Click on <code>Storage</code>
# Click on <code>Public -> View</code>
# Select you document and click <code>copy</code> saving your file
# Don't forget to delete you document

=== Copying ===

[[Image:copy.jpg]]

# Click on the <code>kopier</code> button
# Select resolution/scanning mode using the display and the keypad
## Select destination to the HDD (note that if you select to HDD other people might download the file before you delete it)
# Select start (black-and-white or color)

InitLabv4/Printers/Konica Minolta C3110

2024-03-15T17:10:46Z

Rattus:

= TL;DR =

'''Model:''' Konica Minolta C3110

'''URI:''' ''socket://172.31.190.43:9100'' (for printing) & ''http://172.31.190.43'' (UI)

'''Location:''' main room

'''Type:''' color laser MFP with ADF

= Overview =

It can be accessed for printing on URI: '''socket://172.31.190.43:9100''' .

UI can be accessed on '''http://172.31.190.43'''

=== Network Printing Instructions ===

[https://openwrt.org/docs/guide-user/services/print_server/p910ndprinterserver#configure_clients See how to connect over the network]

On windows ''TODO'' .

=== Scanning to the Internal Storage ===

Put what you want to scan on the flatbed or the ADF.

# Click on the <code>scan</code> button
# Select resolution/scanning mode using the display and the keypad
## Select destination to the HDD (note that if you select to HDD other people might download the file before you delete it)
# Select <code>start</code> (black-and-white or color)
# Go to http://172.31.190.43/
# Click on <code>Public User</code> and <code>Log in</code>
# Click on <code>Storage</code>
# Click on <code>Public -> View</code>
# Select you document and click <code>copy</code> saving your file
# Don't forget to delete you document

=== Copying ===

# Click on the <code>kopier</code> button
# Select resolution/scanning mode using the display and the keypad
## Select destination to the HDD (note that if you select to HDD other people might download the file before you delete it)
# Select start (black-and-white or color)

InitLabv4/Printers/Konica Minolta C3110

2024-03-15T16:08:22Z

Rattus: Created page with "= TL;DR = '''Model:''' Konica Minolta C3110 '''URI:''' ''socket://172.31.190.43:9100'' (for printing) & ''http://172.31.190.43'' (UI) '''Location:''' main room '''Type:''' color laser MFP with ADF = Overview = It can be accessed for printing on URI: '''socket://172.31.190.43:9100''' . UI can be accessed on '''http://172.31.190.43''' === Network Printing Instructions === [https://openwrt.org/docs/guide-user/services/print_server/p910ndprinterserver#configure_cl..."

InitLabv4

2024-03-15T16:02:28Z

Rattus:

Init Lab v4 (affectionately referred to as Init Lab x64) is the current space for Init Lab.

(While we're still working on the wiki intensively, here's an overview of all pages in the InitLabv3 prefix: [//{{SERVERNAME}}/index.php?title=Special:PrefixIndex&prefix=InitLabv4&namespace=0 Table of Contents])

== Address ==

The hackerspace is located on Tzar Asen 64A in Sofia, Bulgaria (in Cyrillic: ул. "Цар Асен" №64А, София, България).

[[initLabv4#How_to_get_here|How to get here]]

== Practical information when visiting ==

* [[initLabv4/Garbage|Taking out the garbage TODO]]
* [[initLabv4/Food|Food and drinks TODO]]

=== Entering ===

Since we just moved into the new place the automated unlock system is not yet implemented.

If you need to enter the lab for the time being, you must contact Vladimir Vasilev 0885448475 or another board of trustees member ahead of time.

We hope to have everything up and running soon.

=== Leaving ===
{{:InitLabv4/Leaving TODO}}

=== Stickers ===

Stickers and assorted swag can be found on the floor 3 landing and the bookshelf in the lab hallway.

=== Printers ===
Initlab has 2 printers. Please be mindful when using them.

* [[InitLabv4/Printers/Konica Minolta C3110|Konica Minolta C3110]] - Color Laser MFP with ADF scanner
* [[InitLabv3/Printers/HP LaserJet P2055DN|HP LaserJet P2055DN]] - B&W Laser Duplex

=== Scaners ===

Initlab has two scanners:

* Canon CanoScan LiDE 120 (TODO: wiki page)
* [[InitLabv4/Printers/Konica Minolta C3110|Konica Minolta C3110]] - Color Laser MFP with ADF scanner

== Description ==

=== Rooms ===

TODO

=== Photos ===

TODO

=== Floorplan ===

[[File:floorplan-v4-unlabeled.jpg|thumb|center|Floorplan]]

=== Phonebook ===

TODO

== How to get here ==

It is situated on the top floor of [https://www.facebook.com/casalibri64/ Casa Libri].

''TODO'' See also the information on the website: https://initlab.org

=== Map ===

TODO

=== Public transport ===

* Metro: National Palace of Culture station
* Tram: National Palace of Culture (NDK) stop
* Trolleybus: National Palace of Culture (NDK) stop

Contactless payments accepted at vehicle and turnstile readers.

=== Car ===

init Lab is in a paid street parking area ([https://www.sofiatraffic.bg/en/parking/pochasovo-plateno-parkirane/p/1 Blue Zone]). Expect to circle the area multiple times as parking spots are scarce.
Park & Ride garage available at James Bourchier metro station. Privately run parking lots and garages can also be found nearby.

=== Entrance ===

TODO photos/video

== Further reading ==

InitLabv3/Printers/Brother DCP-J4110DW

2024-03-15T16:00:38Z

Rattus:

== TL;DR ==

'''NO LONGER IN initLab'''

'''Model:''' Brother DCP-J4110DW

'''URI:''' -

'''Location:''' -

'''Type:''' ink-jet with flatbed scanner

== Overview ==

One of the printers in InitLab was multifunctional ink-jet network enabled printer '''Brother DCP-J4110DW'''.

Installation steps for Linux/OSX for printing:
# You will need to install '''[https://en.wikipedia.org/wiki/CUPS CUPS]''' (which is a local print server/software for your PC/laptop)
# Download the latest available deb/rpm packages from the official Brother website or from the wiki backup link:
## DEB and RPM LPD/LPR drivers: [[Media:Dcpj4110dw_linux_drivers.zip|dcpj4110dw_linux_drivers.zip]]
## Arch drivers package: [https://aur.archlinux.org/packages/brother-dcpj4110dw/ Aur repo: brother-dcpj4110dw 3.0.1-3]
# Install the 2 packages for your distribution.
# Go to CUPS (http://localhost:631): '''Administration''' menu link > '''Add Printer''' button > Select the '''Discovered Network Printers: Brother DCP-J4110DW''' option and finish the rest of the installation with default settings.
# Go to the '''Administration''' menu link > '''Manage Printers''' button > Click on the new printer '''DCPJ4110DW''' > From the '''Administration''' drop down list, choose '''Modify Printer'''.
#: ''Note:'' Adding new printer to CUPS requires '''administrative access''', so you should expect authentication prompt for your '''local credentials''' during the setup!
# Select the '''LPD/LPR Host or Printer''' option > set the '''Connection''' URI to ''lpd://172.31.190.41/BINARY_P1'' and finish the installation.
# Now you should be able to test the printing.
'''Note''': ''those drivers contains proprietary binary files for the USB/Network install.''

On Windows, you can install the standard Brother driver and choose the Network option during installation.

InitLabv3/Printers/HP LaserJet 3030

2024-03-15T15:58:39Z

Rattus:

= TL;DR =

Printer that used to be in initLab

'''Model:''' HP LaserJet 3030

'''URI:''' -

'''Location:''' -

'''Type:''' black & white printer with ADF scanner (the scanner is over usb)

= Overview =

One of the printers in InitLab was multifunctional laserjet '''HP LaserJet 3030'''.

It can be accessed for printing on URI: -

For scanning there is an attached cable at the location.

=== Network Printing Instructions ===

[https://openwrt.org/docs/guide-user/services/print_server/p910ndprinterserver#configure_clients See how to connect over the network]

On windows one can use HP LaserJet 3050 driver.

=== Scanner ===

There is an USB cable attached to the printer for scanning.

For linux - use the hplip packages '''sudo apt install hplip && hp-setup'''

For scanning:
'''hp-scan --adf --output=scan.pdf --size=A4 --mode=color''' and select the printer.

The flatbed does not seem to work on linux.

=== Fax ===

TODO: connect to the initlab telephony network

== Implementation Notes ==

The print server was hosted on Aerohive AP121 running OpenWRT 19.07 and p910nd. The wifi device was generously provided by maniax.

The device is connected using wireless connection to the initlab network and uses usb2parallel cable for communicating to the printer, so that the usb connection is available for scanning.

Login with ssh authorization is configured so that the majority of initlab power users have ssh access to the device (including maniax, lz1irq, ignisf, Slackware).

InitLabv4

2024-03-15T15:56:23Z

Rattus:

Init Lab v4 (affectionately referred to as Init Lab x64) is the current space for Init Lab.

(While we're still working on the wiki intensively, here's an overview of all pages in the InitLabv3 prefix: [//{{SERVERNAME}}/index.php?title=Special:PrefixIndex&prefix=InitLabv4&namespace=0 Table of Contents])

== Address ==

The hackerspace is located on Tzar Asen 64A in Sofia, Bulgaria (in Cyrillic: ул. "Цар Асен" №64А, София, България).

[[initLabv4#How_to_get_here|How to get here]]

== Practical information when visiting ==

* [[initLabv4/Garbage|Taking out the garbage TODO]]
* [[initLabv4/Food|Food and drinks TODO]]

=== Entering ===

Since we just moved into the new place the automated unlock system is not yet implemented.

If you need to enter the lab for the time being, you must contact Vladimir Vasilev 0885448475 or another board of trustees member ahead of time.

We hope to have everything up and running soon.

=== Leaving ===
{{:InitLabv4/Leaving TODO}}

=== Stickers ===

Stickers and assorted swag can be found on the floor 3 landing and the bookshelf in the lab hallway.

=== Printers ===
Initlab has 2 printers. Please be mindful when using them.

* [[InitLabv4/Printers/Konica Minolta C3110|Konica Minolta C3110]] - Color Laser MFP with ADF scanner
* [[InitLabv3/Printers/HP LaserJet 3030|HP LaserJer 3030]] - B&W MFP with ADF scanner

=== Scaners ===

Initlab has two scanners:

* Canon CanoScan LiDE 120 (TODO: wiki page)
* [[InitLabv4/Printers/Konica Minolta C3110|Konica Minolta C3110]] - Color Laser MFP with ADF scanner

== Description ==

=== Rooms ===

TODO

=== Photos ===

TODO

=== Floorplan ===

[[File:floorplan-v4-unlabeled.jpg|thumb|center|Floorplan]]

=== Phonebook ===

TODO

== How to get here ==

It is situated on the top floor of [https://www.facebook.com/casalibri64/ Casa Libri].

''TODO'' See also the information on the website: https://initlab.org

=== Map ===

TODO

=== Public transport ===

* Metro: National Palace of Culture station
* Tram: National Palace of Culture (NDK) stop
* Trolleybus: National Palace of Culture (NDK) stop

Contactless payments accepted at vehicle and turnstile readers.

=== Car ===

init Lab is in a paid street parking area ([https://www.sofiatraffic.bg/en/parking/pochasovo-plateno-parkirane/p/1 Blue Zone]). Expect to circle the area multiple times as parking spots are scarce.
Park & Ride garage available at James Bourchier metro station. Privately run parking lots and garages can also be found nearby.

=== Entrance ===

TODO photos/video

== Further reading ==

InitLabv4/Printers/HP LaserJet P2055DN

2023-10-23T08:17:29Z

Rattus: Created page with "= TL;DR = '''Model:''' HP LaserJet P2055DN '''URI:''' ''socket://172.31.190.44:9100'' '''Location:''' main room '''Type:''' black & white printer with duplex = Overview = It can be accessed for printing on URI: '''socket://172.31.190.44:9100''' . For scanning there is an attached cable at the location. === Network Printing Instructions === [https://openwrt.org/docs/guide-user/services/print_server/p910ndprinterserver#configure_clients See how to connect over the..."

= TL;DR =

'''Model:''' HP LaserJet P2055DN

'''URI:''' ''socket://172.31.190.44:9100''

'''Location:''' main room

'''Type:''' black & white printer with duplex

= Overview =

It can be accessed for printing on URI: '''socket://172.31.190.44:9100''' .

For scanning there is an attached cable at the location.

=== Network Printing Instructions ===

[https://openwrt.org/docs/guide-user/services/print_server/p910ndprinterserver#configure_clients See how to connect over the network]

On windows ''TODO'' .

InitLabv4

2023-10-23T08:15:33Z

Rattus:

Init Lab v4 (affectionately referred to as Init Lab x64) is the current space for Init Lab.

(While we're still working on the wiki intensively, here's an overview of all pages in the InitLabv3 prefix: [//{{SERVERNAME}}/index.php?title=Special:PrefixIndex&prefix=InitLabv4&namespace=0 Table of Contents])

== Address ==

The hackerspace is located on Tzar Asen 64A in Sofia, Bulgaria (in Cyrillic: ул. "Цар Асен" №64А, София, България).

[[initLabv4#How_to_get_here|How to get here]]

== Practical information when visiting ==

* [[initLabv4/Garbage|Taking out the garbage TODO]]
* [[initLabv4/Food|Food and drinks TODO]]

=== Entering ===

Since we just moved into the new place the automated unlock system is not yet implemented.

If you need to enter the lab for the time being, you must contact Vladimir Vasilev 0885448475 or another board of trustees member ahead of time.

We hope to have everything up and running soon.

=== Leaving ===
{{:InitLabv4/Leaving TODO}}

=== Stickers ===

TODO

=== Printers ===
Initlab has 2 printers. Please be mindful when using them.

* [[InitLabv3/Printers/HP LaserJet 3030|HP LaserJer 3030]] - B&W MFP with ADF scanner
* [[InitLabv4/Printers/HP LaserJet P2055DN|HP LaserJer P2055DN]] - B&W MFP with ADF scanner
* (To be sold) [[InitLabv3/Printers/Brother DCP-J4110DW|Brother DCP-J4110DW]] - Color Inkjet MFP

=== Scaners ===

Initlab has two scanners:

* Canon CanoScan LiDE 120 (TODO: wiki page)
* [[InitLabv3/Printers/HP LaserJet 3030|HP LaserJer 3030]] - B&W MFP with ADF scanner

== Description ==

=== Rooms ===

TODO

=== Photos ===

TODO

=== Floorplan ===

[[File:floorplan-v4-unlabeled.jpg|thumb|center|Floorplan]]

=== Phonebook ===

TODO

== How to get here ==

It is situated on the top floor of the [https://www.facebook.com/casalibri64/|Casa Libri].

''TODO'' See also the information on the website: https://initlab.org

=== Map ===

TODO

=== Public transport ===

TODO

=== Car ===

TODO

=== Entrance ===

TODO photos/video

== Further reading ==

InitLabv3/Printers/HP LaserJet 3030

2023-10-23T08:11:57Z

Rattus:

= TL;DR =

'''Model:''' HP LaserJet 3030

'''URI:''' ''socket://172.31.190.43:9100''

'''Location:''' main room

'''Type:''' black & white printer with ADF scanner (the scanner is over usb)

= Overview =

One of the printers in InitLab is multifunctional laserjet '''HP LaserJet 3030'''.

It can be accessed for printing on URI: '''socket://172.31.190.43:9100''' .

For scanning there is an attached cable at the location.

=== Network Printing Instructions ===

[https://openwrt.org/docs/guide-user/services/print_server/p910ndprinterserver#configure_clients See how to connect over the network]

On windows one can use HP LaserJet 3050 driver.

=== Scanner ===

There is an USB cable attached to the printer for scanning.

For linux - use the hplip packages '''sudo apt install hplip && hp-setup'''

For scanning:
'''hp-scan --adf --output=scan.pdf --size=A4 --mode=color''' and select the printer.

The flatbed does not seem to work on linux.

=== Fax ===

TODO: connect to the initlab telephony network

== Implementation Notes ==

The print server is hosted on Aerohive AP121 running OpenWRT 19.07 and p910nd. The wifi device was generously provided by maniax.

The device is connected using wireless connection to the initlab network and uses usb2parallel cable for communicating to the printer, so that the usb connection is available for scanning.

Login with ssh authorization is configured so that the majority of initlab power users have ssh access to the device (including maniax, lz1irq, ignisf, Slackware).

Project/DoorSystem

2021-03-09T09:33:40Z

Rattus:

''' Door opening system '''

'''This page describes the door opening system used in Init Lab v3, which is no longer in use.'''

= Basics =

The system has two separate pieces: opening the door, and unlocking the door, controlled by two separate mechanisms. The locking is done by an electro-mechanical door lock, and the opening/closing is done by a small (something).

== Accessing the system(s) ==

The system can be accessed remotely in two ways: using [[Project/Fauna|fauna]] or by calling +359-24624356. The phone number is routed over VoIP(SIP) from support.bg to cassie.

Also, next to the door there are two buttons on the white box - a red and a green one. The red one locks the door, the green one unlocks it. If the door is open and you press the red button, it will lock 1 second after the door is closed.

== Using the phone ==

When you call the phone:

* If the door is locked:
** The system checks if the source phone number is in the list of allowed-to-unlock people. If not, the system hangs up.
** The system picks up, and using a voice similar to that of Stephen Hawking asks "Enter code".
** It waits for a 6-digit pin code, which is verified in the database if it's the right PIN code for this calling number.
** If the entered code is wrong, the voice says "Wrong". You have three tries, if you fail, it says "Fuck off" and hangs up.
** If the code entered is the right one, the voice says "Opening door", unlocks the door and opens it.
*** The system then logs the door opening and unlocking, as like in the opening below.
* If the door is not locked:
** The system opens the door
** The system logs the door opening via [https://twitter.com/initlabkeeper twitter]. Using the source phone number, a textual ID is looked up in the [[Project/Fauna|Fauna]] database and logged, if the user has register its phone number.

== Using the bulphone in front of the door ==

* This phone is next to the front door
<gallery showfilename=true>
File:labphone.jpg|labphone.jpg
File:labphone1.jpg|labphone1.jpg
File:labphone2.jpg|labphone2.jpg
</gallery>

* You have to dial 150 to get into the system
* It'll ask you for you phone number, enter it and # after it
* Next follow the normal phone instructions (asking for a code, etc.)

= Unlocking =

The door uses a [http://www.lesibg.com/product.php?ProductID=369 Bulkey BKS300] electro-mechanical lock. It's connected though a board to an olinuxino device that runs some Go code to control the opening closing.

The software and schematics are available at [https://github.com/kzyapkov/pesho github], and was developed by Radoslav Borisvov and Kiril Zyapkov.

= Opening =

There is a set of scripts on cassie that send a signal on the serial port (raise the DTR), to close a relay for 6 seconds. This relay is connected to the button next to the door opening panel in the corridor, and basically presses it.

= Future plans =

* None at the moment

= Sources/links =

* [http://www.lesibg.com/product.php?ProductID=369 Bulkey BKS300 lock]
* [https://github.com/kzyapkov/pesho door unlocking software and schematics]
* [https://vasil.ludost.net/blog/?p=2872 Blog post on the door opening]
* [https://github.com/initLab/fauna Fauna sources on github]
* [[Project/Fauna|Fauna page on this wiki]]

[[Category:Project]]

Project/DoorSystem

2021-03-09T09:33:14Z

Rattus:

''' Door opening system '''

'''This page describes the door opening system used in Init Lab v3, which is no longer in use'''

= Basics =

The system has two separate pieces: opening the door, and unlocking the door, controlled by two separate mechanisms. The locking is done by an electro-mechanical door lock, and the opening/closing is done by a small (something).

== Accessing the system(s) ==

The system can be accessed remotely in two ways: using [[Project/Fauna|fauna]] or by calling +359-24624356. The phone number is routed over VoIP(SIP) from support.bg to cassie.

Also, next to the door there are two buttons on the white box - a red and a green one. The red one locks the door, the green one unlocks it. If the door is open and you press the red button, it will lock 1 second after the door is closed.

== Using the phone ==

When you call the phone:

* If the door is locked:
** The system checks if the source phone number is in the list of allowed-to-unlock people. If not, the system hangs up.
** The system picks up, and using a voice similar to that of Stephen Hawking asks "Enter code".
** It waits for a 6-digit pin code, which is verified in the database if it's the right PIN code for this calling number.
** If the entered code is wrong, the voice says "Wrong". You have three tries, if you fail, it says "Fuck off" and hangs up.
** If the code entered is the right one, the voice says "Opening door", unlocks the door and opens it.
*** The system then logs the door opening and unlocking, as like in the opening below.
* If the door is not locked:
** The system opens the door
** The system logs the door opening via [https://twitter.com/initlabkeeper twitter]. Using the source phone number, a textual ID is looked up in the [[Project/Fauna|Fauna]] database and logged, if the user has register its phone number.

== Using the bulphone in front of the door ==

* This phone is next to the front door
<gallery showfilename=true>
File:labphone.jpg|labphone.jpg
File:labphone1.jpg|labphone1.jpg
File:labphone2.jpg|labphone2.jpg
</gallery>

* You have to dial 150 to get into the system
* It'll ask you for you phone number, enter it and # after it
* Next follow the normal phone instructions (asking for a code, etc.)

= Unlocking =

The door uses a [http://www.lesibg.com/product.php?ProductID=369 Bulkey BKS300] electro-mechanical lock. It's connected though a board to an olinuxino device that runs some Go code to control the opening closing.

The software and schematics are available at [https://github.com/kzyapkov/pesho github], and was developed by Radoslav Borisvov and Kiril Zyapkov.

= Opening =

There is a set of scripts on cassie that send a signal on the serial port (raise the DTR), to close a relay for 6 seconds. This relay is connected to the button next to the door opening panel in the corridor, and basically presses it.

= Future plans =

* None at the moment

= Sources/links =

* [http://www.lesibg.com/product.php?ProductID=369 Bulkey BKS300 lock]
* [https://github.com/kzyapkov/pesho door unlocking software and schematics]
* [https://vasil.ludost.net/blog/?p=2872 Blog post on the door opening]
* [https://github.com/initLab/fauna Fauna sources on github]
* [[Project/Fauna|Fauna page on this wiki]]

[[Category:Project]]

Main Page

2021-03-09T09:30:54Z

Rattus: Link to the new lab

'''Init Lab''' is a hackerspace in Sofia, Bulgaria. You can find out more about the current place '''[[InitLabv4|here]]'''.

There are a few projects '''[[Projects|here]]'''.

InitLabv4

2021-03-09T09:29:45Z

Rattus: Created page with "Init Lab v4 (affectionately referred to as Init Lab x64) is the current space for Init Lab. (While we're still working on the wiki intensively, here's an overview of all page..."

Init Lab v4 (affectionately referred to as Init Lab x64) is the current space for Init Lab.

(While we're still working on the wiki intensively, here's an overview of all pages in the InitLabv3 prefix: [//{{SERVERNAME}}/index.php?title=Special:PrefixIndex&prefix=InitLabv4&namespace=0 Table of Contents])

== Address ==

The hackerspace is located on Tzar Asen Steet 64A in Sofia, Bulgaria (in Cyrillic: ул. "Цар Асен" №64А, София, България).

[[initLabv4#How_to_get_here|How to get here]]

== Practical information when visiting ==

* [[initLabv4/Garbage|Taking out the garbage TODO]]
* [[initLabv4/Food|Food and drinks TODO]]

=== Entering ===

Since we just moved into the new place the automated unlock system is not yet implemented.

If you need to enter the lab for the time being, you must contact Vladimir Vasilev 0885448475 or another board of trustees member ahead of time.

We hope to have everything up and running soon.

=== Leaving ===
{{:InitLabv4/Leaving TODO}}

=== Stickers ===

TODO

=== Printers ===
Initlab has 2 printers. Please be mindful when using them.

''TODO: the links below refer to the old printer locations/current locations are in the big room.''

* [[InitLabv3/Printers/HP LaserJet 3030|HP LaserJer 3030]] - B&W MFP with ADF scanner
* [[InitLabv3/Printers/Brother DCP-J4110DW|Brother DCP-J4110DW]] - Color Inkjet MFP

== Description ==

=== Rooms ===

TODO

=== Photos ===

TODO

=== Floorplan ===

[[File:floorplan-v4-unlabeled.jpg|thumb|center|Floorplan]]

=== Phonebook ===

TODO

== How to get here ==

It is situated on the top floor of the [https://www.facebook.com/casalibri64/|Casa Libri].

''TODO'' See also the information on the website: https://initlab.org

=== Map ===

TODO

=== Public transport ===

TODO

=== Car ===

TODO

=== Entrance ===

TODO photos/video

== Further reading ==

File:Floorplan-v4-unlabeled.jpg

2021-03-09T09:29:15Z

Rattus:

InitLabv3

2021-03-09T09:12:01Z

Rattus: Mark the page as obsolete

Initlab v3 '''used to be''' a space for Initlab.

(While we're still working on the wiki intensively, here's an overview of all pages in the InitLabv3 prefix: [//{{SERVERNAME}}/index.php?title=Special:PrefixIndex&prefix=InitLabv3&namespace=0 Table of Contents])

== Address ==

The hackerspace is located on 6 Rila Street in Sofia, Bulgaria (in cyrillic: ул. "Рила" 6, София, България). Please note that this is the Rila Street near Lavov Most, not in Pancharevo.

== Practical information when visiting ==

* [[initLabv3/Garbage|Taking out the garbage]]
* [[initLabv3/Food|Food and drinks]]

=== Entering ===

When the space is already unlocked, the door to init Lab is opened automatically when you call the phone number 02/4624356. The system will hang up and unlock the door for you. There is a regular doorbell as well.

Trusted members of the lab with a Fauna account can lock and unlock the lab. All members can lock it using the web interface.

If you have an account in the Fauna and have entered a door code, you can also use the Bulphone to open the door. See [[DoorSystem#Using_the_bulphone_in_front_of_the_door|here]]. If you are a trusted member, you can also unlock the door.

=== Leaving ===
{{:InitLabv3/Leaving}}

=== Stickers ===

In the hallway rest area there is a small table with stickers and brochures that you can take.

If you represent a hackerspace or an open-source project please feel free to leave us some.

<gallery>
File:Stickers1.jpg|Top-down view of the stickers table
File:Stickers2.jpg|Brochures on the stickers table
</gallery>

=== Printers ===
Initlab has 2 printers. Please be mindful when using them.
* [[InitLabv3/Printers/HP LaserJet 3030|HP LaserJer 3030]] - B&W MFP with ADF scanner
* [[InitLabv3/Printers/Brother DCP-J4110DW|Brother DCP-J4110DW]] - Color Inkjet MFP

== Description ==

=== Rooms ===

* '''[[InitLabv3/Lecture_Room|Lecture room]]''' - has a capacity of 30 people, a projector and a screen, whiteboards. Suitable for all kinds of events.
* '''[[InitLabv3/Ruby_Room|Ruby room]]''' - called so because [http://railsgirls.com/sofia Rails Girls Sofia] meetings happen there. It has a capacity of 12 people, a couple of sofas, some chairs, a whiteboard and a projector.
* '''[[InitLabv3/Cowork_Room|Cowork room]]''' - a place for [[coworking]]
* '''[[InitLabv3/Hardware_Aquarium|Hardware aquarium]]''' - a room with proper tools and 2-3 workspaces for hardware hackers.
* '''[[InitLabv3/Sound_Studio|Sound recording studio]]''' - two soundproofed rooms where you can record sounds, improvise and practice your music skills
* '''[[InitLabv3/Kitchen|Kitchen]]''' - here you can make tea, coffee or food. See [[InitLabv3/Food]] for details.
* '''Relaxation and meeting zones''' - there are 3 transitional areas with seating places, where groups of 2 to 4 people can sit down to read, relax, or drink beer. You can also find our [[Book Crossing]] library here.
* '''[[InitLabv3/Co-location|Corridor colocation]]''' - two racks in the corridor, to co-locate stuff.

=== Photos ===

<gallery showfilename=true>
File:10_entryway-entr.jpg|10_entryway-entr.jpg
File:11_entryway-stairs.jpg|11_entryway-stairs.jpg
File:12_entryway-door.jpg|12_entryway-door.jpg
File:20_stairs-top1.jpg|20_stairs-top1.jpg
File:20_stairs-top2.jpg|20_stairs-top2.jpg
File:20_stairs-top3.jpg|20_stairs-top3.jpg
File:21_coridor-1.jpg|21_coridor-1.jpg
File:21_coridor-2.jpg|21_coridor-2.jpg
File:22_coridor-int.jpg|22_coridor-int.jpg
</gallery>

Also see:
* [https://vasil.ludost.net/pics/20150211lablib/ initLab library]

{{:InitLabv3/Hardware}}

=== Floorplan ===

[[File:floorplan-labeled.jpg|thumb|center|Labeled floorplan]]

=== Phonebook ===
{{:Phonebook}}

== How to get here ==

See also the information on the website: https://initlab.org

=== Map ===

=== Public transport ===
You can take '''tram 18, tram 3, tram 4''' to station "ulica Kozlodui". Form there you need to cross street end few meters right is str. "Veslets". It is only a minute walk from there.

Another way to come and visit Initlab is by '''underground[http://www2.metropolitan.bg/en/map/]'''. Once you get on line 2, direction "Lozenets" -> "Obelya", get off on "Lavov Most Station".

=== Car ===

=== Entrance ===

<gallery heights=300 widths=300 showfilename=true>
File:00_external_house1.jpg|Space seen from the street
File:00_external_house2.jpg|Space seen from the street
File:01_external_alley.jpg|Alley to the entrance
File:labphone1.jpg|Hackerspace door
</gallery>

== Further reading ==

InitLabv3/Printers/HP LaserJet 3030

2020-01-27T10:32:11Z

Rattus: Fix typo

= TL;DR =

'''Model:''' HP LaserJet 3030

'''URI:''' ''socket://172.31.190.43:9100''

'''Location:''' hallway

'''Type:''' black & white printer with ADF scanner (the scanner is over usb)

= Overview =

One of the printers in InitLab is multifunctional laserjet '''HP LaserJet 3030'''.

It can be accessed for printing on URI: '''socket://172.31.190.43:9100'''

For scanning there is an attached location

=== Network Printing Instructions ===

[https://openwrt.org/docs/guide-user/services/print_server/p910ndprinterserver#configure_clients See how to connect over the network]

On windows one can use HP LaserJet 3050 driver.

=== Scanner ===

There is an USB cable attached to the printer for scanning.

For linux - use the hplip packages '''sudo apt install hplip && hp-setup'''

For scanning:
'''hp-scan --adf --output=scan.pdf --size=A4 --mode=color''' and select the printer.

The flatbed does not seem to work on linux.

=== Fax ===

TODO: connect to the initlab telephony network

== Implementation Notes ==

The print server is hosted on Aerohive AP121 running OpenWRT 19.07 and p910nd. The device was generously provided by maniax.

The device is connected using wireless connection to the initlab network and uses usb2parallel cable for communicating to the printer, so that the usb connection is available for scanning.

Login with ssh authorization is configured so that the majority of initlab power users have ssh access to the device (including maniax, lz1irq, ignisf, Slackware).

InitLabv3/Food

2020-01-26T22:27:00Z

Rattus: Add food places and shops

== Food and drinks available at initLab ==

initlab has food and drinks in the Relax area in hallway between the [[InitLabv3/Lecture_Room|Lecture room]] and [[InitLabv3/Ruby_Room|Ruby room]] - including cooled [https://en.wikipedia.org/wiki/Club-Mate Club Mate]!

[[Consumables|Check out the list of commonly available consumables]]

{{:Consumables}}

=== Members' fridge ===

There is a members only fridge in the [[InitLabv3/Kitchen|Kitchen]].

Food in the fridge that has not been labelled can be consumed freely by members and can be thrown away on Friday evening each week.

== Shops and places close by ==

=== Food places ===

* There are a lot of places for fast food near [https://www.openstreetmap.org/#map=18/42.70499/23.32398 Lion's bridge (Lavov most)] - 5-10 minutes on foot from the lab
* [https://www.openstreetmap.org/node/4947500437 Sliced pizza] - probably the cheapest pizza in Sofia (BGN 1 per slice), it is not the greatest but you can't beat the price
* [https://www.kashtite.com/bg Hadjidraganov's Houses Restaurant] - Bulgarian cuisine in traditional architecture and style, 5 minutes from the lab, on the expensive side

=== Shops ===

* [https://www.openstreetmap.org/node/6054199193 ProMarket] - general store 5 minutes from the lab

Consumables

2020-01-26T22:08:04Z

Rattus:

=== Drinks ===

* Various types of Club Mate
* Beer (several types)
* Coke (Coca-Cola)
* Coffee (machine) available

TODO: add picture of the beer fridge

=== Food ===

* TODO

=== Price ===

The food and drinks available at initLab are usually not free - because the lab has to order and buy the food, the lab also requires some money from you when you consume food or drinks. In addition by buying from the lab you are supporting it.

There is a handwritten price list. You can place the money in the money jar on top of the beer fridge.

=== Restocking ===

If you notice that the items in the fridge are running out, please, restock them from the non-refrigerated stock next to it.

If you notice that something is running dangerously low, please, send an email to ''us AT initlab.org'' .

InitLabv3/Food

2020-01-26T22:01:52Z

Rattus: Update info on members' fridge

Consumables

2020-01-26T22:01:00Z

Rattus: Update content

=== Drinks ===

* Various types of Club Mate
* Beer (several types)
* Coke (Coca-Cola)
* Coffee (machine) available

=== Food ===

* TODO

=== Price ===

The food and drinks available at initLab are usually not free - because the lab has to order and buy the food, the lab also requires some money from you when you consume food or drinks. In addition by buying from the lab you are supporting it.

There is a handwritten price list. You can place the money in the money jar on top of the beer fridge.

InitLabv3/Food

2020-01-26T21:51:53Z

Rattus: Update information

InitLabv3

2020-01-26T20:03:21Z

Rattus: Rearrange sections

Initlab v3 is the current space for Initlab.

(While we're still working on the wiki intensively, here's an overview of all pages in the InitLabv3 prefix: [//{{SERVERNAME}}/index.php?title=Special:PrefixIndex&prefix=InitLabv3&namespace=0 Table of Contents])

== Address ==

The hackerspace is located on 6 Rila Street in Sofia, Bulgaria (in cyrillic: ул. "Рила" 6, София, България). Please note that this is the Rila Street near Lavov Most, not in Pancharevo.

== Practical informating when visiting ==

* [[initLabv3/Garbage|Taking out the garbage]]
* [[initLabv3/Food|Food and drinks]]

=== Entering ===

When the space is already unlocked, the door to init Lab is opened automatically when you call the phone number 02/4624356. The system will hang up and unlock the door for you. There is a regular doorbell as well.

Trusted members of the lab with a Fauna account can lock and unlock the lab. All members can lock it using the web interface.

If you have an account in the Fauna and have entered a door code, you can also use the Bulphone to open the door. See [[DoorSystem#Using_the_bulphone_in_front_of_the_door|here]]. If you are a trusted member, you can also unlock the door.

=== Leaving ===
{{:InitLabv3/Leaving}}

=== Stickers ===

In the hallway rest area there is a small table with stickers and brochures that you can take.

If you represent a hackerspace or an open-source project please feel free to leave us some.

<gallery>
File:Stickers1.jpg|Top-down view of the stickers table
File:Stickers2.jpg|Brochures on the stickers table
</gallery>

=== Printers ===
Initlab has 2 printers. Please be mindful when using them.
* [[InitLabv3/Printers/HP LaserJet 3030|HP LaserJer 3030]] - B&W MFP with ADF scanner
* [[InitLabv3/Printers/Brother DCP-J4110DW|Brother DCP-J4110DW]] - Color Inkjet MFP

== Description ==

=== Rooms ===

* '''[[InitLabv3/Lecture_Room|Lecture room]]''' - has a capacity of 30 people, a projector and a screen, whiteboards. Suitable for all kinds of events.
* '''[[InitLabv3/Ruby_Room|Ruby room]]''' - called so because [http://railsgirls.com/sofia Rails Girls Sofia] meetings happen there. It has a capacity of 12 people, a couple of sofas, some chairs, a whiteboard and a projector.
* '''[[InitLabv3/Cowork_Room|Cowork room]]''' - a place for [[coworking]]
* '''[[InitLabv3/Hardware_Aquarium|Hardware aquarium]]''' - a room with proper tools and 2-3 workspaces for hardware hackers.
* '''[[InitLabv3/Sound_Studio|Sound recording studio]]''' - two soundproofed rooms where you can record sounds, improvise and practice your music skills
* '''[[InitLabv3/Kitchen|Kitchen]]''' - here you can make tea, coffee or food. See [[InitLabv3/Food]] for details.
* '''Relaxation and meeting zones''' - there are 3 transitional areas with seating places, where groups of 2 to 4 people can sit down to read, relax, or drink beer. You can also find our [[Book Crossing]] library here.
* '''[[InitLabv3/Co-location|Corridor colocation]]''' - two racks in the corridor, to co-locate stuff.

=== Photos ===

<gallery showfilename=true>
File:10_entryway-entr.jpg|10_entryway-entr.jpg
File:11_entryway-stairs.jpg|11_entryway-stairs.jpg
File:12_entryway-door.jpg|12_entryway-door.jpg
File:20_stairs-top1.jpg|20_stairs-top1.jpg
File:20_stairs-top2.jpg|20_stairs-top2.jpg
File:20_stairs-top3.jpg|20_stairs-top3.jpg
File:21_coridor-1.jpg|21_coridor-1.jpg
File:21_coridor-2.jpg|21_coridor-2.jpg
File:22_coridor-int.jpg|22_coridor-int.jpg
</gallery>

Also see:
* [https://vasil.ludost.net/pics/20150211lablib/ initLab library]

{{:InitLabv3/Hardware}}

=== Floorplan ===

[[File:floorplan-labeled.jpg|thumb|center|Labeled floorplan]]

=== Phonebook ===
{{:Phonebook}}

== How to get here ==

See also the information on the website: https://initlab.org

=== Map ===

=== Public transport ===
You can take '''tram 18, tram 3, tram 4''' to station "ulica Kozlodui". Form there you need to cross street end few meters right is str. "Veslets". It is only a minute walk from there.

Another way to come and visit Initlab is by '''underground[http://www2.metropolitan.bg/en/map/]'''. Once you get on line 2, direction "Lozenets" -> "Obelya", get off on "Lavov Most Station".

=== Car ===

=== Entrance ===

<gallery heights=300 widths=300 showfilename=true>
File:00_external_house1.jpg|Space seen from the street
File:00_external_house2.jpg|Space seen from the street
File:01_external_alley.jpg|Alley to the entrance
File:labphone1.jpg|Hackerspace door
</gallery>

== Further reading ==

InitLabv3

2020-01-26T19:50:54Z

Rattus: Add stickers information

Initlab v3 is the current space for Initlab.

(While we're still working on the wiki intensively, here's an overview of all pages in the InitLabv3 prefix: [//{{SERVERNAME}}/index.php?title=Special:PrefixIndex&prefix=InitLabv3&namespace=0 Table of Contents])

== Address ==

The hackerspace is located on 6 Rila Street in Sofia, Bulgaria (in cyrillic: ул. "Рила" 6, София, България). Please note that this is the Rila Street near Lavov Most, not in Pancharevo.

== Practical informating when visiting ==

* [[initLabv3/Garbage|Taking out the garbage]]
* [[initLabv3/Food|Food and drinks]]

=== Entering ===

When the space is already unlocked, the door to init Lab is opened automatically when you call the phone number 02/4624356. The system will hang up and unlock the door for you. There is a regular doorbell as well.

Trusted members of the lab with a Fauna account can lock and unlock the lab. All members can lock it using the web interface.

If you have an account in the Fauna and have entered a door code, you can also use the Bulphone to open the door. See [[DoorSystem#Using_the_bulphone_in_front_of_the_door|here]]. If you are a trusted member, you can also unlock the door.

=== Leaving ===
{{:InitLabv3/Leaving}}

=== Printers ===
Initlab has 2 printers. Please be mindful when using them.
* [[InitLabv3/Printers/HP LaserJet 3030|HP LaserJer 3030]] - B&W MFP with ADF scanner
* [[InitLabv3/Printers/Brother DCP-J4110DW|Brother DCP-J4110DW]] - Color Inkjet MFP

=== Stickers ===

In the hallway rest area there is a small table with stickers and brochures that you can take.

If you represent a hackerspace or an open-source project please feel free to leave us some.

<gallery>
File:Stickers1.jpg|Top-down view of the stickers table
File:Stickers2.jpg|Brochures on the stickers table
</gallery>

== Description ==

=== Rooms ===

* '''[[InitLabv3/Lecture_Room|Lecture room]]''' - has a capacity of 30 people, a projector and a screen, whiteboards. Suitable for all kinds of events.
* '''[[InitLabv3/Ruby_Room|Ruby room]]''' - called so because [http://railsgirls.com/sofia Rails Girls Sofia] meetings happen there. It has a capacity of 12 people, a couple of sofas, some chairs, a whiteboard and a projector.
* '''[[InitLabv3/Cowork_Room|Cowork room]]''' - a place for [[coworking]]
* '''[[InitLabv3/Hardware_Aquarium|Hardware aquarium]]''' - a room with proper tools and 2-3 workspaces for hardware hackers.
* '''[[InitLabv3/Sound_Studio|Sound recording studio]]''' - two soundproofed rooms where you can record sounds, improvise and practice your music skills
* '''[[InitLabv3/Kitchen|Kitchen]]''' - here you can make tea, coffee or food. See [[InitLabv3/Food]] for details.
* '''Relaxation and meeting zones''' - there are 3 transitional areas with seating places, where groups of 2 to 4 people can sit down to read, relax, or drink beer. You can also find our [[Book Crossing]] library here.
* '''[[InitLabv3/Co-location|Corridor colocation]]''' - two racks in the corridor, to co-locate stuff.

=== Photos ===

<gallery showfilename=true>
File:10_entryway-entr.jpg|10_entryway-entr.jpg
File:11_entryway-stairs.jpg|11_entryway-stairs.jpg
File:12_entryway-door.jpg|12_entryway-door.jpg
File:20_stairs-top1.jpg|20_stairs-top1.jpg
File:20_stairs-top2.jpg|20_stairs-top2.jpg
File:20_stairs-top3.jpg|20_stairs-top3.jpg
File:21_coridor-1.jpg|21_coridor-1.jpg
File:21_coridor-2.jpg|21_coridor-2.jpg
File:22_coridor-int.jpg|22_coridor-int.jpg
</gallery>

Also see:
* [https://vasil.ludost.net/pics/20150211lablib/ initLab library]

{{:InitLabv3/Hardware}}

=== Floorplan ===

[[File:floorplan-labeled.jpg|thumb|center|Labeled floorplan]]

=== Phonebook ===
{{:Phonebook}}

== How to get here ==

See also the information on the website: https://initlab.org

=== Map ===

=== Public transport ===
You can take '''tram 18, tram 3, tram 4''' to station "ulica Kozlodui". Form there you need to cross street end few meters right is str. "Veslets". It is only a minute walk from there.

Another way to come and visit Initlab is by '''underground[http://www2.metropolitan.bg/en/map/]'''. Once you get on line 2, direction "Lozenets" -> "Obelya", get off on "Lavov Most Station".

=== Car ===

=== Entrance ===

<gallery heights=300 widths=300 showfilename=true>
File:00_external_house1.jpg|Space seen from the street
File:00_external_house2.jpg|Space seen from the street
File:01_external_alley.jpg|Alley to the entrance
File:labphone1.jpg|Hackerspace door
</gallery>

== Further reading ==

File:Stickers2.jpg

2020-01-26T19:31:32Z

Rattus: Brochures view of the stickers table

Brochures view of the stickers table

File:Stickers1.jpg

2020-01-26T19:30:33Z

Rattus: Top-down view of the stickers table.

Top-down view of the stickers table.

InitLabv3/Printers/HP LaserJet 3030

2020-01-25T16:04:16Z

Rattus: Change location

= TL;DR =

'''Model:''' HP LaserJet 3030

'''URI:''' ''socket://172.31.190.43:9100''

'''Location:''' hallway

'''Type:''' black & white printer with ADF scanner (the scanner is over usb)

= Overview =

One of the printers in InitLab is multifunctional laserjet '''HP LaserJet 3030'''.

It can be accessed for printing on URI: '''socket://172.31.190.43:9100'''

For scanning there is an attached location

=== Network Printing Instructions ===

[https://openwrt.org/docs/guide-user/services/print_server/p910ndprinterserver#configure_clients See how to connect over ticket]

On windows one can use HP LaserJet 3050 driver.

=== Scanner ===

There is an USB cable attached to the printer for scanning.

For linux - use the hplip packages '''sudo apt install hplip && hp-setup'''

For scanning:
'''hp-scan --adf --output=scan.pdf --size=A4 --mode=color''' and select the printer.

The flatbed does not seem to work on linux.

=== Fax ===

TODO: connect to the initlab telephony network

== Implementation Notes ==

The print server is hosted on Aerohive AP121 running OpenWRT 19.07 and p910nd. The device was generously provided by maniax.

The device is connected using wireless connection to the initlab network and uses usb2parallel cable for communicating to the printer, so that the usb connection is available for scanning.

Login with ssh authorization is configured so that the majority of initlab power users have ssh access to the device (including maniax, lz1irq, ignisf, Slackware).

InitLabv3/Printers/HP LaserJet 3030

2020-01-25T15:48:16Z

Rattus: Indicate ssh authorization is working

= TL;DR =

'''Model:''' HP LaserJet 3030

'''URI:''' ''socket://172.31.190.43:9100''

'''Location:''' lecture room

'''Type:''' black & white printer with ADF scanner (the scanner is over usb)

= Overview =

One of the printers in InitLab is multifunctional laserjet '''HP LaserJet 3030'''.

It can be accessed for printing on URI: '''socket://172.31.190.43:9100'''

For scanning there is an attached location

=== Network Printing Instructions ===

[https://openwrt.org/docs/guide-user/services/print_server/p910ndprinterserver#configure_clients See how to connect over ticket]

On windows one can use HP LaserJet 3050 driver.

=== Scanner ===

There is an USB cable attached to the printer for scanning.

For linux - use the hplip packages '''sudo apt install hplip && hp-setup'''

For scanning:
'''hp-scan --adf --output=scan.pdf --size=A4 --mode=color''' and select the printer.

The flatbed does not seem to work on linux.

=== Fax ===

TODO: connect to the initlab telephony network

== Implementation Notes ==

The print server is hosted on Aerohive AP121 running OpenWRT 19.07 and p910nd. The device was generously provided by maniax.

The device is connected using wireless connection to the initlab network and uses usb2parallel cable for communicating to the printer, so that the usb connection is available for scanning.

Login with ssh authorization is configured so that the majority of initlab power users have ssh access to the device (including maniax, lz1irq, ignisf, Slackware).

InitLabv3/Printers/HP LaserJet 3030

2020-01-20T23:35:40Z

Rattus: Change the device to Aerohive

= TL;DR =

'''Model:''' HP LaserJet 3030

'''URI:''' ''socket://172.31.190.43:9100''

'''Location:''' lecture room

'''Type:''' black & white printer with ADF scanner (the scanner is over usb)

= Overview =

One of the printers in InitLab is multifunctional laserjet '''HP LaserJet 3030'''.

It can be accessed for printing on URI: '''socket://172.31.190.43:9100'''

For scanning there is an attached location

=== Network Printing Instructions ===

[https://openwrt.org/docs/guide-user/services/print_server/p910ndprinterserver#configure_clients See how to connect over ticket]

On windows one can use HP LaserJet 3050 driver.

=== Scanner ===

There is an USB cable attached to the printer for scanning.

For linux - use the hplip packages '''sudo apt install hplip && hp-setup'''

For scanning:
'''hp-scan --adf --output=scan.pdf --size=A4 --mode=color''' and select the printer.

The flatbed does not seem to work on linux.

=== Fax ===

TODO: connect to the initlab telephony network

== Implementation Notes ==

The print server is hosted on Aerohive AP121 running OpenWRT 19.07 and p910nd. The device was generously provided by maniax.

The device is connected using wireless connection to the initlab network and uses usb2parallel cable for communicating to the printer, so that the usb connection is available for scanning.

TODO: make sure ssh authorization works so that the majority of initlab power users have ssh access to the device (including maniax, lz1irq, ignisf, Slackware).

InitLabv3/Printers/HP LaserJet 3030

2020-01-20T23:32:13Z

Rattus: /* TL;DR */

= TL;DR =

'''Model:''' HP LaserJet 3030

'''URI:''' ''socket://172.31.190.43:9100''

'''Location:''' lecture room

'''Type:''' black & white printer with ADF scanner (the scanner is over usb)

= Overview =

One of the printers in InitLab is multifunctional laserjet '''HP LaserJet 3030'''.

It can be accessed for printing on URI: '''socket://172.31.190.43:9100'''

For scanning there is an attached location

=== Network Printing Instructions ===

[https://openwrt.org/docs/guide-user/services/print_server/p910ndprinterserver#configure_clients See how to connect over ticket]

On windows one can use HP LaserJet 3050 driver.

=== Scanner ===

There is an USB cable attached to the printer for scanning.

For linux - use the hplip packages '''sudo apt install hplip && hp-setup'''

For scanning:
'''hp-scan --adf --output=scan.pdf --size=A4 --mode=color''' and select the printer.

The flatbed does not seem to work on linux.

=== Fax ===

TODO: connect to the initlab telephony network

== Implementation Notes ==

The print server is hosted on [https://wikidevi.com/wiki/Linksys_NSLU2 Linksys NSLU2] running OpenWRT 18.06 and p910nd. The device was generously provided by ignisf.

The device is connected using wired connection to the initlab network and uses usb2parallel cable for communicating to the printer, so that the usb connection is available for scanning. For some reason in order for the printer to be seen an usb hub is required.

A hardware hack has been applied so that the device boots on power-on (the power must be out for at least 5-10 sec).

The majority of initlab power users have access ssh access to the device (including maniax, lz1irq, ignisf, Slackware).

InitLabv3/Printers/HP LaserJet 3030

2019-12-26T18:07:29Z

Rattus:

= TL;DR =

'''Model:''' HP LaserJet 3030

'''URI:''' ''socket://172.31.190.43:9100'' '''Note: Temporary offline - please use usb!'''

'''Location:''' lecture room

'''Type:''' black & white printer with ADF scanner (the scanner is over usb)

= Overview =

One of the printers in InitLab is multifunctional laserjet '''HP LaserJet 3030'''.

It can be accessed for printing on URI: '''socket://172.31.190.43:9100'''

For scanning there is an attached location

=== Network Printing Instructions ===

[https://openwrt.org/docs/guide-user/services/print_server/p910ndprinterserver#configure_clients See how to connect over ticket]

On windows one can use HP LaserJet 3050 driver.

=== Scanner ===

There is an USB cable attached to the printer for scanning.

For linux - use the hplip packages '''sudo apt install hplip && hp-setup'''

For scanning:
'''hp-scan --adf --output=scan.pdf --size=A4 --mode=color''' and select the printer.

The flatbed does not seem to work on linux.

=== Fax ===

TODO: connect to the initlab telephony network

== Implementation Notes ==

The print server is hosted on [https://wikidevi.com/wiki/Linksys_NSLU2 Linksys NSLU2] running OpenWRT 18.06 and p910nd. The device was generously provided by ignisf.

The device is connected using wired connection to the initlab network and uses usb2parallel cable for communicating to the printer, so that the usb connection is available for scanning. For some reason in order for the printer to be seen an usb hub is required.

A hardware hack has been applied so that the device boots on power-on (the power must be out for at least 5-10 sec).

The majority of initlab power users have access ssh access to the device (including maniax, lz1irq, ignisf, Slackware).

InitLabv3

2019-01-20T22:17:44Z

Rattus: /* Practical informating when visiting */

Initlab v3 is the current space for Initlab.

(While we're still working on the wiki intensively, here's an overview of all pages in the InitLabv3 prefix: [//{{SERVERNAME}}/index.php?title=Special:PrefixIndex&prefix=InitLabv3&namespace=0 Table of Contents])

== Address ==

The hackerspace is located on 6 Rila Street in Sofia, Bulgaria (in cyrillic: ул. "Рила" 6, София, България). Please note that this is the Rila Street near Lavov Most, not in Pancharevo.

== Practical informating when visiting ==

* [[initLabv3/Garbage|Taking out the garbage]]
* [[initLabv3/Food|Food and drinks]]

=== Entering ===

When the space is already unlocked, the door to init Lab is opened automatically when you call the phone number 02/4624356. The system will hang up and unlock the door for you. There is a regular doorbell as well.

Trusted members of the lab with a Fauna account can lock and unlock the lab. All members can lock it using the web interface.

If you have an account in the Fauna and have entered a door code, you can also use the Bulphone to open the door. See [[DoorSystem#Using_the_bulphone_in_front_of_the_door|here]]. If you are a trusted member, you can also unlock the door.

=== Leaving ===
{{:InitLabv3/Leaving}}

=== Printers ===
Initlab has 2 printers. Please be mindful when using them.
* [[InitLabv3/Printers/HP LaserJet 3030|HP LaserJer 3030]] - B&W MFP with ADF scanner
* [[InitLabv3/Printers/Brother DCP-J4110DW|Brother DCP-J4110DW]] - Color Inkjet MFP

== Description ==

=== Rooms ===

* '''[[InitLabv3/Lecture_Room|Lecture room]]''' - has a capacity of 30 people, a projector and a screen, whiteboards. Suitable for all kinds of events.
* '''[[InitLabv3/Ruby_Room|Ruby room]]''' - called so because [http://railsgirls.com/sofia Rails Girls Sofia] meetings happen there. It has a capacity of 12 people, a couple of sofas, some chairs, a whiteboard and a projector.
* '''[[InitLabv3/Cowork_Room|Cowork room]]''' - a place for [[coworking]]
* '''[[InitLabv3/Hardware_Aquarium|Hardware aquarium]]''' - a room with proper tools and 2-3 workspaces for hardware hackers.
* '''[[InitLabv3/Sound_Studio|Sound recording studio]]''' - two soundproofed rooms where you can record sounds, improvise and practice your music skills
* '''[[InitLabv3/Kitchen|Kitchen]]''' - here you can make tea, coffee or food. See [[InitLabv3/Food]] for details.
* '''Relaxation and meeting zones''' - there are 3 transitional areas with seating places, where groups of 2 to 4 people can sit down to read, relax, or drink beer. You can also find our [[Book Crossing]] library here.
* '''[[InitLabv3/Co-location|Corridor colocation]]''' - two racks in the corridor, to co-locate stuff.

=== Photos ===

<gallery showfilename=true>
File:10_entryway-entr.jpg|10_entryway-entr.jpg
File:11_entryway-stairs.jpg|11_entryway-stairs.jpg
File:12_entryway-door.jpg|12_entryway-door.jpg
File:20_stairs-top1.jpg|20_stairs-top1.jpg
File:20_stairs-top2.jpg|20_stairs-top2.jpg
File:20_stairs-top3.jpg|20_stairs-top3.jpg
File:21_coridor-1.jpg|21_coridor-1.jpg
File:21_coridor-2.jpg|21_coridor-2.jpg
File:22_coridor-int.jpg|22_coridor-int.jpg
</gallery>

Also see:
* [https://vasil.ludost.net/pics/20150211lablib/ initLab library]

{{:InitLabv3/Hardware}}

=== Floorplan ===

[[File:floorplan-labeled.jpg|thumb|center|Labeled floorplan]]

=== Phonebook ===
{{:Phonebook}}

== How to get here ==

See also the information on the website: https://initlab.org

=== Map ===

=== Public transport ===
You can take '''tram 18, tram 3, tram 4''' to station "ulica Kozlodui". Form there you need to cross street end few meters right is str. "Veslets". It is only a minute walk from there.

Another way to come and visit Initlab is by '''underground[http://www2.metropolitan.bg/en/map/]'''. Once you get on line 2, direction "Lozenets" -> "Obelya", get off on "Lavov Most Station".

=== Car ===

=== Entrance ===

<gallery heights=300 widths=300 showfilename=true>
File:00_external_house1.jpg|Space seen from the street
File:00_external_house2.jpg|Space seen from the street
File:01_external_alley.jpg|Alley to the entrance
File:labphone1.jpg|Hackerspace door
</gallery>

== Further reading ==

InitLabv3/Printers/HP LaserJet 3030

2019-01-20T22:11:43Z

Rattus:

= TL;DR =

'''Model:''' HP LaserJet 3030

'''URI:''' ''socket://172.31.190.43:9100''

'''Location:''' lecture room

'''Type:''' black & white printer with ADF scanner (the scanner is over usb)

= Overview =

One of the printers in InitLab is multifunctional laserjet '''HP LaserJet 3030'''.

It can be accessed for printing on URI: '''socket://172.31.190.43:9100'''

For scanning there is an attached location

=== Network Printing Instructions ===

[https://openwrt.org/docs/guide-user/services/print_server/p910ndprinterserver#configure_clients See how to connect over ticket]

On windows one can use HP LaserJet 3050 driver.

=== Scanner ===

There is an USB cable attached to the printer for scanning.

For linux - use the hplip packages '''sudo apt install hplip && hp-setup'''

For scanning:
'''hp-scan --adf --output=scan.pdf --size=A4 --mode=color''' and select the printer.

The flatbed does not seem to work on linux.

=== Fax ===

TODO: connect to the initlab telephony network

== Implementation Notes ==

The print server is hosted on [https://wikidevi.com/wiki/Linksys_NSLU2 Linksys NSLU2] running OpenWRT 18.06 and p910nd. The device was generously provided by ignisf.

The device is connected using wired connection to the initlab network and uses usb2parallel cable for communicating to the printer, so that the usb connection is available for scanning. For some reason in order for the printer to be seen an usb hub is required.

A hardware hack has been applied so that the device boots on power-on (the power must be out for at least 5-10 sec).

The majority of initlab power users have access ssh access to the device (including maniax, lz1irq, ignisf, Slackware).

InitLabv3/Printers/HP LaserJet 3030

2019-01-20T18:55:07Z

Rattus: Created page with "= TL;DR = '''Model:''' HP LaserJet 3030 '''URI:''' ''socket://172.31.190.43:9100'' '''Location:''' lecture room '''Type:''' black & white printer with ADF scanner (the sca..."

InitLabv3/Printers/Brother DCP-J4110DW

2019-01-20T18:02:03Z

Rattus:

== TL;DR ==

'''Model:''' Brother DCP-J4110DW

'''URI:''' ''lpd://172.31.190.41/BINARY_P1''

'''Location:''' workroom

'''Type:''' ink-jet with flatbed scanner

== Overview ==

One of the printers in InitLab is multifunctional ink-jet network enabled printer '''Brother DCP-J4110DW'''.

Installation steps for Linux/OSX for printing:
# You will need to install '''[https://en.wikipedia.org/wiki/CUPS CUPS]'''
# Download the latest available deb/rpm packages from the official Brother website or from the wiki backup link:
## DEB and RPM LPD/LPR drivers: [[Media:Dcpj4110dw_linux_drivers.zip|dcpj4110dw_linux_drivers.zip]]
## Arch drivers package: [https://aur.archlinux.org/packages/brother-dcpj4110dw/ Aur repo: brother-dcpj4110dw 3.0.1-3]
# Install the 2 packages for your distribution.
# Go to CUPS (http://localhost:631): '''Administration''' menu link > '''Add Printer''' button > Select the '''Discovered Network Printers: Brother DCP-J4110DW''' option and finish the rest of the installation with default settings.
# Go to the '''Administration''' menu link > '''Manage Printers''' button > Click on the new printer '''DCPJ4110DW''' > From the '''Administration''' drop down list, choose '''Modify Printer'''.
# Select the '''LPD/LPR Host or Printer''' option > set the '''Connection''' URI to ''lpd://172.31.190.41/BINARY_P1'' and finish the installation.
# Now you should be able to test the printing.
'''Note''': ''those drivers contains proprietary binary files for the USB/Network install.''

On Windows, you can install the standard Brother driver and choose the Network option during installation.

InitLabv3/Printers/Brother DCP-J4110DW

2019-01-20T17:56:29Z

Rattus:

== TL;DR ==

'''Model:''' Brother DCP-J4110DW

'''URI:''' ''lpd://172.31.190.41/BINARY_P1''

'''Location:''' workroom

'''Type:''' ink-jet with flatbed scanner

== Details ==

One of the printers in InitLab is multifunctional ink-jet network enabled printer '''Brother DCP-J4110DW'''.

Installation steps for Linux/OSX for printing:
# You will need to install '''[https://en.wikipedia.org/wiki/CUPS CUPS]'''
# Download the latest available deb/rpm packages from the official Brother website or from the wiki backup link:
## DEB and RPM LPD/LPR drivers: [[Media:Dcpj4110dw_linux_drivers.zip|dcpj4110dw_linux_drivers.zip]]
## Arch drivers package: [https://aur.archlinux.org/packages/brother-dcpj4110dw/ Aur repo: brother-dcpj4110dw 3.0.1-3]
# Install the 2 packages for your distribution.
# Go to CUPS (http://localhost:631): '''Administration''' menu link > '''Add Printer''' button > Select the '''Discovered Network Printers: Brother DCP-J4110DW''' option and finish the rest of the installation with default settings.
# Go to the '''Administration''' menu link > '''Manage Printers''' button > Click on the new printer '''DCPJ4110DW''' > From the '''Administration''' drop down list, choose '''Modify Printer'''.
# Select the '''LPD/LPR Host or Printer''' option > set the '''Connection''' URI to ''lpd://172.31.190.41/BINARY_P1'' and finish the installation.
# Now you should be able to test the printing.
'''Note''': ''those drivers contains proprietary binary files for the USB/Network install.''

On Windows, you can install the standard Brother driver and choose the Network option during installation.

InitLabv3/Printers/Brother DCP-J4110DW

2019-01-20T17:31:46Z

Rattus:

InitLabv3/Printers/Brother DCP-J4110DW

2019-01-20T17:21:25Z

Rattus:

One of the printers in InitLab is multifunctional ink-jet network enabled printer '''Brother DCP-J4110DW'''.

URI: '''lpd://172.31.190.41/BINARY_P1'''

Installation steps for Linux/OSX for printing:
# You will need to install '''[https://en.wikipedia.org/wiki/CUPS CUPS]'''
# Download the latest available deb/rpm packages from the official Brother website or from the wiki backup link:
## DEB and RPM LPD/LPR drivers: [[Media:Dcpj4110dw_linux_drivers.zip|dcpj4110dw_linux_drivers.zip]]
## Arch drivers package: [https://aur.archlinux.org/packages/brother-dcpj4110dw/ Aur repo: brother-dcpj4110dw 3.0.1-3]
# Install the 2 packages for your distribution.
# Go to CUPS (http://localhost:631): '''Administration''' menu link > '''Add Printer''' button > Select the '''Discovered Network Printers: Brother DCP-J4110DW''' option and finish the rest of the installation with default settings.
# Go to the '''Administration''' menu link > '''Manage Printers''' button > Click on the new printer '''DCPJ4110DW''' > From the '''Administration''' drop down list, choose '''Modify Printer'''.
# Select the '''LPD/LPR Host or Printer''' option > set the '''Connection''' URI to ''lpd://172.31.190.41/BINARY_P1'' and finish the installation.
# Now you should be able to test the printing.
'''Note''': ''those drivers contains proprietary binary files for the USB/Network install.''

On Windows, you can install the standard Brother driver and choose the Network option during installation.

InitLabv3/Printer

2019-01-20T17:18:28Z

Rattus: Rattus moved page InitLabv3/Printer to InitLabv3/Printers/Brother DCP-J4110DW

#REDIRECT [[InitLabv3/Printers/Brother DCP-J4110DW]]

InitLabv3/Printers/Brother DCP-J4110DW

2019-01-20T17:18:28Z

Rattus: Rattus moved page InitLabv3/Printer to InitLabv3/Printers/Brother DCP-J4110DW

The current printer in InitLab is multifunctional network enabled printer '''Brother DCP-J4110DW'''.

Installation steps for Linux/OSX:
# You will need to install '''[https://en.wikipedia.org/wiki/CUPS CUPS]'''
# Download the latest available deb/rpm packages from the official Brother website or from the wiki backup link:
## DEB and RPM LPD/LPR drivers: [[Media:Dcpj4110dw_linux_drivers.zip|dcpj4110dw_linux_drivers.zip]]
## Arch drivers package: [https://aur.archlinux.org/packages/brother-dcpj4110dw/ Aur repo: brother-dcpj4110dw 3.0.1-3]
# Install the 2 packages for your distribution.
# Go to CUPS (http://localhost:631): '''Administration''' menu link > '''Add Printer''' button > Select the '''Discovered Network Printers: Brother DCP-J4110DW''' option and finish the rest of the installation with default settings.
# Go to the '''Administration''' menu link > '''Manage Printers''' button > Click on the new printer '''DCPJ4110DW''' > From the '''Administration''' drop down list, choose '''Modify Printer'''.
# Select the '''LPD/LPR Host or Printer''' option > set the '''Connection''' URI to ''lpd://172.31.190.41/BINARY_P1'' and finish the installation.
# Now you should be able to test the printing.
'''Note''': ''those drivers contains proprietary binary files for the USB/Network install.''

On Windows, you can install the standard Brother driver and choose the Network option during installation.