InitLabv3/Printers/HP LaserJet 3030 - Revision history

Rattus at 15:58, 15 March 2024

2024-03-15T15:58:39Z

← Older revision		Revision as of 18:58, 15 March 2024
Line 1:		Line 1:
	= TL;DR =		= TL;DR =

			Printer that used to be in initLab

	'''Model:''' HP LaserJet 3030		'''Model:''' HP LaserJet 3030

	'''URI:''' ~~''socket://172.31.190.43:9100''~~		'''URI:''' -

	'''Location:''' ~~main room~~		'''Location:''' -

	'''Type:''' black & white printer with ADF scanner (the scanner is over usb)		'''Type:''' black & white printer with ADF scanner (the scanner is over usb)
Line 11:		Line 13:
	= Overview =		= Overview =

	One of the printers in InitLab is multifunctional laserjet '''HP LaserJet 3030'''.		One of the printers in InitLab was multifunctional laserjet '''HP LaserJet 3030'''.

	It can be accessed for printing on URI: ~~'''socket://172.31.190.43:9100''' .~~		It can be accessed for printing on URI: -

	For scanning there is an attached cable at the location.		For scanning there is an attached cable at the location.
Line 40:		Line 42:
	== Implementation Notes ==		== Implementation Notes ==

	The print server is hosted on Aerohive AP121 running OpenWRT 19.07 and p910nd. The wifi device was generously provided by maniax.		The print server was hosted on Aerohive AP121 running OpenWRT 19.07 and p910nd. The wifi device was generously provided by maniax.

	The device is connected using wireless connection to the initlab network and uses usb2parallel cable for communicating to the printer, so that the usb connection is available for scanning.		The device is connected using wireless connection to the initlab network and uses usb2parallel cable for communicating to the printer, so that the usb connection is available for scanning.

	Login with ssh authorization is configured so that the majority of initlab power users have ssh access to the device (including maniax, lz1irq, ignisf, Slackware).		Login with ssh authorization is configured so that the majority of initlab power users have ssh access to the device (including maniax, lz1irq, ignisf, Slackware).

Rattus at 08:11, 23 October 2023

2023-10-23T08:11:57Z

← Older revision		Revision as of 11:11, 23 October 2023
Line 5:		Line 5:
	'''URI:''' ''socket://172.31.190.43:9100''		'''URI:''' ''socket://172.31.190.43:9100''

	'''Location:''' ~~hallway~~		'''Location:''' main room

	'''Type:''' black & white printer with ADF scanner (the scanner is over usb)		'''Type:''' black & white printer with ADF scanner (the scanner is over usb)
Line 13:		Line 13:
	One of the printers in InitLab is multifunctional laserjet '''HP LaserJet 3030'''.		One of the printers in InitLab is multifunctional laserjet '''HP LaserJet 3030'''.

	It can be accessed for printing on URI: '''socket://172.31.190.43:9100'''		It can be accessed for printing on URI: '''socket://172.31.190.43:9100''' .

	For scanning there is an attached location		For scanning there is an attached cable at the location.

	=== Network Printing Instructions ===		=== Network Printing Instructions ===
Line 40:		Line 40:
	== Implementation Notes ==		== Implementation Notes ==

	The print server is hosted on Aerohive AP121 running OpenWRT 19.07 and p910nd. The device was generously provided by maniax.		The print server is hosted on Aerohive AP121 running OpenWRT 19.07 and p910nd. The wifi device was generously provided by maniax.

	The device is connected using wireless connection to the initlab network and uses usb2parallel cable for communicating to the printer, so that the usb connection is available for scanning.		The device is connected using wireless connection to the initlab network and uses usb2parallel cable for communicating to the printer, so that the usb connection is available for scanning.

	Login with ssh authorization is configured so that the majority of initlab power users have ssh access to the device (including maniax, lz1irq, ignisf, Slackware).		Login with ssh authorization is configured so that the majority of initlab power users have ssh access to the device (including maniax, lz1irq, ignisf, Slackware).

Rattus: Fix typo

2020-01-27T10:32:11Z

Fix typo

← Older revision		Revision as of 13:32, 27 January 2020
Line 19:		Line 19:
	=== Network Printing Instructions ===		=== Network Printing Instructions ===

	[https://openwrt.org/docs/guide-user/services/print_server/p910ndprinterserver#configure_clients See how to connect over ~~ticket~~]		[https://openwrt.org/docs/guide-user/services/print_server/p910ndprinterserver#configure_clients See how to connect over the network]

	On windows one can use HP LaserJet 3050 driver.		On windows one can use HP LaserJet 3050 driver.

Rattus: Change location

2020-01-25T16:04:16Z

Change location

← Older revision		Revision as of 19:04, 25 January 2020
Line 5:		Line 5:
	'''URI:''' ''socket://172.31.190.43:9100''		'''URI:''' ''socket://172.31.190.43:9100''

	'''Location:''' ~~lecture room~~		'''Location:''' hallway

	'''Type:''' black & white printer with ADF scanner (the scanner is over usb)		'''Type:''' black & white printer with ADF scanner (the scanner is over usb)

Rattus: Indicate ssh authorization is working

2020-01-25T15:48:16Z

Indicate ssh authorization is working

← Older revision		Revision as of 18:48, 25 January 2020
Line 44:		Line 44:
	The device is connected using wireless connection to the initlab network and uses usb2parallel cable for communicating to the printer, so that the usb connection is available for scanning.		The device is connected using wireless connection to the initlab network and uses usb2parallel cable for communicating to the printer, so that the usb connection is available for scanning.

	~~TODO: make sure~~ ssh authorization ~~works~~ so that the majority of initlab power users have ssh access to the device (including maniax, lz1irq, ignisf, Slackware).		Login with ssh authorization is configured so that the majority of initlab power users have ssh access to the device (including maniax, lz1irq, ignisf, Slackware).

Rattus: Change the device to Aerohive

2020-01-20T23:35:40Z

Change the device to Aerohive

← Older revision		Revision as of 02:35, 21 January 2020
Line 40:		Line 40:
	== Implementation Notes ==		== Implementation Notes ==

	The print server is hosted on ~~[https://wikidevi.com/wiki/Linksys_NSLU2 Linksys NSLU2]~~ running OpenWRT 18.06 and p910nd. The device was generously provided by ~~ignisf~~.		The print server is hosted on Aerohive AP121 running OpenWRT 19.07 and p910nd. The device was generously provided by maniax.

	The device is connected using ~~wired~~ connection to the initlab network and uses usb2parallel cable for communicating to the printer, so that the usb connection is available for scanning~~. For some reason in order for the printer to be seen an usb hub is required~~.		The device is connected using wireless connection to the initlab network and uses usb2parallel cable for communicating to the printer, so that the usb connection is available for scanning.

	~~A hardware hack has been applied~~ so that the ~~device boots on power-on (the power must be out for at least 5-10 sec).~~		TODO: make sure ssh authorization works so that the majority of initlab power users have ssh access to the device (including maniax, lz1irq, ignisf, Slackware).

	~~The~~ majority of initlab power users have ~~access~~ ssh access to the device (including maniax, lz1irq, ignisf, Slackware).

Rattus: /* TL;DR */

2020-01-20T23:32:13Z

TL;DR

← Older revision		Revision as of 02:32, 21 January 2020
Line 3:		Line 3:
	'''Model:''' HP LaserJet 3030		'''Model:''' HP LaserJet 3030

	'''URI:''' ''socket://172.31.190.43:9100~~'' '''Note: Temporary offline - please use usb!'~~''		'''URI:''' ''socket://172.31.190.43:9100''

	'''Location:''' lecture room		'''Location:''' lecture room

Rattus at 18:07, 26 December 2019

2019-12-26T18:07:29Z

← Older revision		Revision as of 21:07, 26 December 2019
Line 3:		Line 3:
	'''Model:''' HP LaserJet 3030		'''Model:''' HP LaserJet 3030

	'''URI:''' ''socket://172.31.190.43:9100''		'''URI:''' ''socket://172.31.190.43:9100'' '''Note: Temporary offline - please use usb!'''

	'''Location:''' lecture room		'''Location:''' lecture room

Rattus at 22:11, 20 January 2019

2019-01-20T22:11:43Z

← Older revision		Revision as of 01:11, 21 January 2019
Line 37:		Line 37:

	TODO: connect to the initlab telephony network		TODO: connect to the initlab telephony network

			== Implementation Notes ==

			The print server is hosted on [https://wikidevi.com/wiki/Linksys_NSLU2 Linksys NSLU2] running OpenWRT 18.06 and p910nd. The device was generously provided by ignisf.

			The device is connected using wired connection to the initlab network and uses usb2parallel cable for communicating to the printer, so that the usb connection is available for scanning. For some reason in order for the printer to be seen an usb hub is required.

			A hardware hack has been applied so that the device boots on power-on (the power must be out for at least 5-10 sec).

			The majority of initlab power users have access ssh access to the device (including maniax, lz1irq, ignisf, Slackware).

Rattus: Created page with "= TL;DR = '''Model:''' HP LaserJet 3030 '''URI:''' ''socket://172.31.190.43:9100'' '''Location:''' lecture room '''Type:''' black & white printer with ADF scanner (the sca..."

2019-01-20T18:55:07Z

Created page with "= TL;DR = '''Model:''' HP LaserJet 3030 '''URI:''' ''socket://172.31.190.43:9100'' '''Location:''' lecture room '''Type:''' black & white printer with ADF scanner (the sca..."

New page

= TL;DR =

'''Model:''' HP LaserJet 3030

'''URI:''' ''socket://172.31.190.43:9100''

'''Location:''' lecture room

'''Type:''' black & white printer with ADF scanner (the scanner is over usb)

= Overview =

One of the printers in InitLab is multifunctional laserjet '''HP LaserJet 3030'''.

It can be accessed for printing on URI: '''socket://172.31.190.43:9100'''

For scanning there is an attached location

=== Network Printing Instructions ===

[https://openwrt.org/docs/guide-user/services/print_server/p910ndprinterserver#configure_clients See how to connect over ticket]

On windows one can use HP LaserJet 3050 driver.

=== Scanner ===

There is an USB cable attached to the printer for scanning.

For linux - use the hplip packages '''sudo apt install hplip && hp-setup'''

For scanning:
'''hp-scan --adf --output=scan.pdf --size=A4 --mode=color''' and select the printer.

The flatbed does not seem to work on linux.

=== Fax ===

TODO: connect to the initlab telephony network