Difference between revisions of "IPv6Tunnels/ExampleConfigs"
Jump to navigation
Jump to search
(→bird) |
|||
Line 76: | Line 76: | ||
# Configure logging | # Configure logging | ||
log syslog { debug, trace, info, remote, warning, error, auth, fatal, bug }; | |||
# Listen only on IPv6 | |||
listen bgp v6only; | listen bgp v6only; | ||
Line 99: | Line 97: | ||
# protocol and synchronize different kernel tables with different BIRD tables. | # protocol and synchronize different kernel tables with different BIRD tables. | ||
protocol kernel { | protocol kernel { | ||
export all; | export all; | ||
} | } | ||
Line 107: | Line 102: | ||
# This pseudo-protocol watches all interface up/down events. | # This pseudo-protocol watches all interface up/down events. | ||
protocol device { | protocol device { | ||
scan time 10; | # Time in seconds between two scans of the network interface list. On | ||
# systems where we are notified about interface status changes | |||
# asynchronously (such as newer versions of Linux), we need to scan the | |||
# list only in order to avoid confusion by lost notification messages, | |||
# so the default time is set to a large value. | |||
#scan time 10; # Scan interfaces every 10 seconds | |||
} | |||
protocol static { | |||
# REPLACE WITH YOUR NET HERE | |||
route 2001:67c:21bc:4::/64 unreachable; # Sink route | |||
} | } | ||
filter ext_originate_ip6 { | filter ext_originate_ip6 { | ||
# REPLACE WITH YOUR NET HERE | # REPLACE WITH YOUR NET HERE | ||
if (net = 2001:67c:21bc:4::/64 ) then accept; | |||
else reject; | |||
} | } | ||
template bgp t_ext_ip6 { | template bgp t_ext_ip6 { | ||
# replace ASN here! | # replace ASN here! | ||
local as 65532; | |||
export filter ext_originate_ip6; | |||
} | } | ||
# REPLACE NEIGHBOR IPs HERE | # REPLACE NEIGHBOR IPs HERE | ||
# | # IPv6 bgp link to marla | ||
protocol bgp marla_tbc_ip6 from t_ext_ip6 { | protocol bgp marla_tbc_ip6 from t_ext_ip6 { | ||
description "uplink to marla/tbc over ipv6"; | |||
neighbor 2001:67c:21bc:7fff:1:9:0:1 as 200533; | |||
# preference 110; # Set higher preference for Marla | |||
} | } | ||
# | # IPv6 bgp link to tyler | ||
protocol bgp tyler_tbc_ip6 from t_ext_ip6 { | protocol bgp tyler_tbc_ip6 from t_ext_ip6 { | ||
description "uplink to tyler/tbc over ipv6"; | |||
neighbor 2001:67c:21bc:7fff:2:9:0:1 as 200533; | |||
} | } | ||
Revision as of 22:31, 9 August 2016
Example configs
Linux
Tunnel interface on Debian
auto marla-ipv6-spn iface marla-ipv6-spn inet6 v4tunnel mode ipip ttl 225 address 2001:67c:21bc:7fff:0001:2:0:2 netmask 120 local USER-IP-ADDRESS endpoint 79.98.105.18 gateway 2001:67c:21bc:7fff:0001:2:0:1
Tunnel interface on OpenWRT
Install the 6in4 package, and add something like this to /etc/config/network (change the addresses):
config interface 'crock6' option proto '6in4' option peeraddr '79.98.105.18' option ip6addr '2001:67c:21bc:7fff:0001:10:0:2/64' option ip6gw '2001:67c:21bc:7fff:0001:10:0:1' option ip6prefix '2001:67c:21bc:c::/64' option ttl '255'
quagga
In this example, 2001:67c:21bc:7fff:2:1:0:1 and 2001:67c:21bc:7fff:2:1:1:1 are the remote end-points of the tunnels, 2001:67c:21bc:4::/62 is the assigned network, and 65535 is the ASN delegated to this peer.
Basically, this configuration says "connect to the two peers, and filter what I announce to them to be just my own network".
(this is actually the live configuration of initLab)
bgpd.conf:
! router bgp 65535 bgp router-id 192.168.232.1 no bgp default ipv4-unicast neighbor 2001:67c:21bc:7fff:2:1:0:1 remote-as 200533 neighbor 2001:67c:21bc:7fff:2:1:0:1 interface lab-ipv6-od neighbor 2001:67c:21bc:7fff:2:1:0:1 timers 3 10 neighbor 2001:67c:21bc:7fff:2:1:1:1 remote-as 200533 neighbor 2001:67c:21bc:7fff:2:1:1:1 interface lab-ipv6-tbc neighbor 2001:67c:21bc:7fff:2:1:1:1 timers 3 10 ! address-family ipv6 network 2001:67c:21bc:4::/62 neighbor 2001:67c:21bc:7fff:2:1:0:1 activate neighbor 2001:67c:21bc:7fff:2:1:0:1 route-map external-out out neighbor 2001:67c:21bc:7fff:2:1:1:1 activate neighbor 2001:67c:21bc:7fff:2:1:1:1 route-map external-out out exit-address-family ! ipv6 prefix-list mine seq 5 permit 2001:67c:21bc:4::/62 ipv6 prefix-list mine seq 15 deny any ! route-map external-out permit 10 match ipv6 address prefix-list mine ! route-map external-out deny 20 !
bird
This is /etc/bird/bird6.conf:
# Configure logging log syslog { debug, trace, info, remote, warning, error, auth, fatal, bug }; # Listen only on IPv6 listen bgp v6only; # Write your router id here, any ipv4 address that you have will do router id 46.233.38.1; # The direct protocol automatically generates device routes to # all network interfaces. Can exist in as many instances as you wish # if you want to populate multiple routing tables with device routes. protocol direct { interface "*"; } # This pseudo-protocol performs synchronization between BIRD's routing # tables and the kernel. If your kernel supports multiple routing tables # (as Linux 2.2.x does), you can run multiple instances of the kernel # protocol and synchronize different kernel tables with different BIRD tables. protocol kernel { export all; } # This pseudo-protocol watches all interface up/down events. protocol device { # Time in seconds between two scans of the network interface list. On # systems where we are notified about interface status changes # asynchronously (such as newer versions of Linux), we need to scan the # list only in order to avoid confusion by lost notification messages, # so the default time is set to a large value. #scan time 10; # Scan interfaces every 10 seconds } protocol static { # REPLACE WITH YOUR NET HERE route 2001:67c:21bc:4::/64 unreachable; # Sink route } filter ext_originate_ip6 { # REPLACE WITH YOUR NET HERE if (net = 2001:67c:21bc:4::/64 ) then accept; else reject; } template bgp t_ext_ip6 { # replace ASN here! local as 65532; export filter ext_originate_ip6; } # REPLACE NEIGHBOR IPs HERE # IPv6 bgp link to marla protocol bgp marla_tbc_ip6 from t_ext_ip6 { description "uplink to marla/tbc over ipv6"; neighbor 2001:67c:21bc:7fff:1:9:0:1 as 200533; # preference 110; # Set higher preference for Marla } # IPv6 bgp link to tyler protocol bgp tyler_tbc_ip6 from t_ext_ip6 { description "uplink to tyler/tbc over ipv6"; neighbor 2001:67c:21bc:7fff:2:9:0:1 as 200533; }
Mikrotik
TODO: explain config
/interface 6to4 add comment="initlab ipv6" local-address=46.47.81.47 mtu=1480 name=\ marla-ipv6-bsc remote-address=79.98.105.18 add comment="initlab ipv6" local-address=46.47.81.47 mtu=1480 name=\ tyler-ipv6-bst remote-address=78.128.1.18 /routing bgp instance set default as=65531 /ipv6 address add address=2001:67c:21bc:7fff:1:4:0:2/120 advertise=no comment=uplink-marla \ interface=marla-ipv6-bsc add address=2001:67c:21bc:2:4e5e:cff:feb5:3e93 comment="lan" eui-64=\ yes interface=bridge-lan add address=2001:67c:21bc:7fff:2:4:1:2/120 advertise=no comment=uplink-tyler \ interface=tyler-ipv6-bst /routing bgp network add network=2001:67c:21bc:2::/64 synchronize=no /routing bgp peer add address-families=ipv6 name=tyler remote-address=\ 2001:67c:21bc:7fff:2:4:1:1 remote-as=200533 ttl=default add address-families=ipv6 name=marla remote-address=\ 2001:67c:21bc:7fff:1:4:0:1 remote-as=200533 ttl=default
Juniper
Juniper SRX
- XX.XX.XX.XX is your local ip address
interfaces { ip-0/0/0 { unit 0 { tunnel { source XX.XX.XX.XX; destination 79.98.105.18; ttl 255; } family inet6 { address 2001:67c:21bc:7fff:0001:12:1:2/120; } } unit 1 { tunnel { source XX.XX.XX.XX; destination 78.128.1.18; ttl 255; } family inet6 { address 2001:67c:21bc:7fff:0002:12:0:2/120; } } } } routing-options { graceful-restart; rib inet6.0 { static { route 2001:67c:21bc:e::/64 { discard; as-path { origin igp; } } } } router-id XX.XX.XX.XX; autonomous-system 65529; } protocols { bgp { group IPv6-BG-Tunnels { type external; import import-IPv6-ludost-net; family inet6 { any; } export export-IPv6-ludost-net; neighbor 2001:67c:21bc:7fff:0001:12:1:1 { local-address 2001:67c:21bc:7fff:0001:12:1:2; peer-as 200533; local-as 65529; } neighbor 2001:67c:21bc:7fff:0002:12:0:1 { local-address 2001:67c:21bc:7fff:0002:12:0:2; peer-as 200533; local-as 65529; } } } } policy-options { policy-statement export-IPv6-ludost-net { term 0 { from { route-filter 2001:67c:21bc:e::/64 exact; } then accept; } term default { then reject; } } policy-statement import-IPv6-ludost-net { term default { then accept; } } } security { forwarding-options { family { inet6 { mode packet-based; } } } }