Project/VHDL

Introduction

Ever wished you could make your own integrated circuits? Is regular logic just not doing the trick for you? This project is all about programmable logic, and how you can define your own digital circuits yourself. Welcome to the wonderful world of CPLD's and FPGA's!

History

There was a time that, if you wanted a new logic function on your custom PCB, you had to have more chips. TTL logic chips that is. With quad NAND gates like the 74HC00, and a whole range of different logic functions, PCB's often became very complex. Often, not all the gates of such integrated circuits were unused. Late 1970's, one of the first well-known programmable logic devices hit the streets. The Programmable Array Logic or PAL chips were made by Signetics, and at a later stadium copied by National Semiconductor, Texas Instruments and AMD. With names as "PAL16L8" and "PAL22V10", you could define your own logic in a One Time Programmable chip. It worked with fuses and could be programmed only once. It was very convenient to define your own logic gates, without the need for all those specific logic chips. At a later stadium, Electrically erasable GAL devices were pin-to-pin compatible and the road was set for devices that implemented large quantities of logic gates in a single device.

The PAL and GAL devices had a very limited amount of pins, and Complex Programmable Logic Devices or CPLD's were a great improvement on both pin count and complexity. But it wasn't until the Field Programmable Gate Arrays or FPGA's when the functionality and usability really took off. Of course, all of these devices had to be programmed in a certain way, and most of the time it means really defining what gate and functions had to active. There was a great need for a programming language to define the functionality of digital circuits. The Hardware Description Language or HDL was on its way!

Different flavors

The current market for programmable logic is roughly separated in a few brands:

• Xilinx, the largest manufacturer. Popular chips include the Spartan series, Virtex and Zynq devices.
• Altera (now owned by Intel). Inventors of the MAX CPLD's, Cyclone FPGA's and Stratix series.
• Actel. A smaller brand, but still the Igloo and ProAsic series are pretty well known.
• Lattice has the iCE series, MachXO and ispMACH devices.

There are a number of other smaller manufacturers, but these are the most well known ones. But if you want to program a CPLD or FPGA, you have several options. Most software packages offer the use of schematic diagrams to define the functionality inside, but while your designs get more complex, you will want to learn a HDL or Hardware Description Language. Two are commonly known:

• VHDL or VHSIC Hardware Description Language. This is most commonly used in Europe.
• Verilog is more used in the USA.