Project/LightingTheFacade

From initLab
Revision as of 19:49, 23 January 2016 by Maniax (talk | contribs) (Project finished)
Jump to navigation Jump to search

Lights on the facade of the lab

Status

  • Plan - to have all the lights on the outside controllable from software
  • github issue
  • The system is ready and operational

Implementation

  • We installed LED lights on the facade
    • 2x30W on the street
    • 2x10W on the internal entryway
  • For each of these we have a small relay
  • All relays are controlled through a neomontana netcontrol via SNMP.

Cabling

  • For each relay, we have a pair going to it though the cabling of the house
  • We push 5V on those pairs
  • All relays go to the patch panel in the work room:
    • Lecture room - pp 15
    • Work room - pp 18
    • Hackvarium - pp 7
  • From that patch panel over pp 5 through cable WR2 they go to the rack in the coridor, to pp 2, and from it to the neomontana netcontrol
  • On the netcontrol we use relays 5-7 to control this, and push 5V from a normal power supply.

Logic

  • It's all implemented in an extremely hacky php/shell script, screenshot.
  • It loops every 60 seconds
  • Fetches the status of the lamps, the door, if it's light or dark outside
  • If the lights are on:
    • If it's day and the lamps aren't forced on, they're turned off;
    • If it's night, the door is locked and more than 15 minutes have passed since the locking, the lamps are turned off;
  • If the lamps are off:
    • If they're forced, they're turned on;
    • If it's night and the door is unlocked (e.g. there are people in the lab), the lamps are turned on;

photos

switchbox.jpg
dvor.jpg
street1.jpg
street2.jpg
street3.jpg